Reliable Termite Detection Using the Latest Technologies

To ensure reliable results when it comes to pest inspections, Defence Pest & Building Inspection Services uses only high-quality inspection equipment and the latest technologies. Two of the most important technologies we have are the use of Borescope and Termatrac.


Borescope Technology

Termite colonies, on most occasions, are not readily visible from the surface – whether it be on the wall, floor or ceiling. This makes detection of termite activities less reliable with the mere use of the naked eyes, while allowing infestations to rapidly grow without being noticed.

With the use of a borescope, pest inspectors can examine termite activities by inserting the device into a small wall cavity. The device will help keep track of moisture and any mudding that is present within close proximity. The borescope includes a lens and an eyepiece that allows our inspector to see possible signs of infestation.

Although this is an invasive method, the device only leaves a tiny hole that is not easily noticeable, and is mostly used for hard to reach areas, corners and crevices. There is also no need for repeatedly boring holes in suspected areas of termite activities because the borescope makes it easy to track traces of infestation in nearby areas.



The Termatrac is non-invasive pest inspection equipment, which uses moisture and temperature levels to effectively detect signs of termite activities. This means that there is no need for drilling or physically penetrating the wall, floor or any other surface to be able to identify infestations. This device is effective for detecting pest activities on most common building materials, including timber, fibreboard, plasterboard, tiles and marble.

The Termatrac device uses a sensor to identify areas with excess moisture and high humidity, as these are two of the basic requirements of termites for survival. The device also features a thermal sensor, helping our technicians to determine the locations of termites by tracking the heat that they generate.

Once the risk areas have been established, our technician can use the built-in radar to scan for movements of termites in the area to confirm their presence and location. The radar also allows us to trace the trails, access points and even the colony of termites.


More Efficient Treatment Process

Since the use of borescope and Termatrac makes the detection process faster and more reliable, the pest treatment process will also become more efficient. In most cases, using the borescope and Termatrac does not disturb termite activities, thus allowing technicians from Defence Pest & Building Inspection Services to effectively carry out pest control methods without the risk of termites moving their colony or spreading to other areas of your property.

Thermal Imaging

One of the greatest threats to any building structure is the presence of moisture. Often, it does not get detected until a lot of damage has already been done. This is because it is often not visible by the naked eye. Another problem is of termite infestation in homes. Termites are more attracted to damp surfaces and therefore it is important to keep the moisture out from homes. Services of building and pest inspections companies in Brisbane make use of thermal imaging for the identification of moisture and termite presence in homes so that adequate measures can be taken against the moisture damage and action is taken for eradication of these creatures.

Thermal or infrared technology makes use of specialized cameras for the detection of termite and termite sub-nests. The amount of thermal energy that comes from an object is adequately measured using these cameras. Different energy levels create different temperatures. This technology is so advanced it can detect even the slightest differences in temperature. This allows eradication and removal measures to be taken before a greater damage has been done. The whole skeleton of the building can be seen by the building inspectors through thermal imaging camera to identify the exact places where any possible termite activity occurs. Thermal imaging is a safe method as it is non-destructive and non-intrusive. There is no need to drill holes in the walls or tear down any structure to apply thermal imaging.

Thermal imaging has a number of other advantages. It not only detects active termites but also inactive termite nests. This is very useful in protecting the building structure and its integrity. The use of this process allows early detection which means the treatment for eradication and removal of termites and moisture will be less expensive as well as less extensive. A lot of costs can be saved in this manner. This latest technology is able to detect hidden termites in some of the difficult to reach areas such as inside walls, under floor coverings and ceiling cavities. Besides termites, thermal pest cameras are also used for the detection of other pests such as rats and possums.

Thermal imaging is the latest trend in the pest control industry and is rapidly expanding as more pest control companies buy these expensive cameras for effective detection of pests and termites in commercial and residential buildings. These can be used for current as well as new home structures to ensure the house is free from these tiny creatures that can cause great harm to the structure as well health of the residents. For better building inspections, pest inspections, and pool inspections in Brisbane it is recommended to hire a company that uses all latest techniques and equipment.

Benefits of Using Termite Detection Radar

Termite inspection and control has always been a huge source of concern for home and commercial building owners. Some decades ago, primitive methods and home remedies were used for dealing with this problem. Now, there are a number of revolutionary techniques introduced that are more accurate and efficient. Some of these include the use of thermal imaging cameras, termite detection radars, borescope and moisture encounter. These are being used extensively by many termite management companies for precise detection and complete eradication of termites from homes and other buildings.

One of the most revolutionary concepts in pest and termite control is the use of Termatrac, or termite detection radar. The use of this device during any building inspections in Brisbane can be very effective in accurately pointing out areas of termite infestation. It is the only technology so far that precisely detects, locates and confirms the presence of termites in buildings without having to physically penetrate the walls, floors or ceilings. There is no disruption or displacement of termite activity when Termatrac is used. This equipment drastically reduces the requirement for any post-inspection repairs, thus saving significant amount of time for pest control professionals.

Termite detection radars are made up of radar signals that are specifically calibrated for the identification of termites. They can detect termites through timber, concrete, drywall and a number of other building materials. These devices are also able to determine the difference between ants and termites without accessing building cavities. As there is no physical penetration, prodding or tapping when termite detection radars are used, the termites stay undisturbed and active for easier detection. There are also no damages caused to the building materials in the process. Since the exact location of termites is identified, the treatment process because more efficient.

Termite detection radar can be used during any building and pool inspections in Brisbane. This is safe to use as its design and manufacturing complies with the EMC regulations.

As the pest problem continues to grow in Australia, there is a need for more efficient pest and termite control measures. New developments are constantly taking place in this industry. One of the most popular equipment used for this purpose is the termite detection radar.

Superior Inspection Services

As we move forward with the growing knowledge of the importance of having a full and thorough building and pest inspection it has become absolutely necessary to continually improve inspection and detection skills.

This is why our staff at Brisbane Building and Pest Inspections must have completed a Residential Building Inspection course that allows them to be accredited by the Queensland Building and Construction Commission (QBCC) (previously the Queensland Building Services Authority (QBSA)).

Up-to-Date Technology

The technology that is available these days to detect any pest or rodent activity is quite amazing. In our complete and professional home inspections we incorporate the use of such services as:-

    • Thermal Imaging Cameras;
    • Termatrac;
    • Borescope;

Thermal Infrared cameras have remarkable abilities and are able to detect such things as termite damage, plumbing, window leakage, missing thermal insulation and overheating electrical equipment. You can see how this single technology alone can save you a fortune in time and money.

Termatrac detection is similar to that of radar and is able to pinpoint activity through products including plasterboard, brick and masonry, thus negating the need to make holes in the walls.

Borescope uses low frequency electronic signals to detect moisture through paint, varnish, tiles and roofing felt.

Service and Integrity

Buying a home, whether it is for yourself to live in or for an investment, is more than likely going to be the single biggest purchase you will ever make.

It is important to get it right to save yourself stress and hardship further down the track.

You can see from the skills and technologies we have outlined above that we have the capabilities to inspect any property big or small, easily accessed or not and supply you with the best possible data about a particular property.

Once we have obtained this data it is presented to you in a comprehensive yet easy to understand report that you can use to ascertain the correct condition of a property.

So when you are ready to buy that special home or investment why not look us up at to see more information on this and our other great services such as pool inspections.

Technologies Used for Building and Pest Inspections

Every nook and cranny of a real property is examined thoroughly during building and pest inspections. Aside from the experienced eye of the inspector, technologies and equipment play a vital role in the inspection process. The building and pest inspector with the help of the latest technologies and equipment makes sure that a home is checked for structural soundness and durability.

Brisbane Building and Pest Inspections uses the latest technologies to carry out guaranteed building inspections. Some of the technologies used by the company include Thermal Imaging Cameras; Termatrac; Borescopes; and Moisture Encounter.

Thermal Imaging Cameras

Modern thermal or infrared (IR) imaging cameras now allow inspectors to spot areas of moisture or thermal inconsistencies and come up with a diagnosis, often without the need to perform additional invasive inspection methods.

Infrared cameras can see what the naked eye cannot. They can spot areas in the home with major building issues, including termite damage, plumbing leakage, missing thermal insulation and more. Thermal imaging can detect many problems that are hidden by wall linings such as termite damage or termite sub-nest and moisture damage.


Termatrac is a breakthrough technology for detecting termites through timber, plaster board, brick or masonry without damaging any building material or disturbing termite activity. This is because Termatrac requires no drilling, tapping or prodding. The device was invented and developed in Australia using technology related to radar.


A borescope is an optical device that can be used to perform remote visual inspection of moulds in homes and buildings. Mould can grow in areas of a building that are impossible to view, such as behind walls and under floors. With the aid of a borescope, these impossible-to-view areas can be inspected for mould growth.

Moisture Encounter

A moisture encounter is a non-destructive general building inspection device. It has three ranges of sensitivity that make it ideal for different building materials: 1) It employs low-frequency electronic signals; 2) The lack of probes or pins to damage the surface of a building; and 3) The ability to spot moisture through varnish, paint, tiles, wall paper or roofing felt.

Building Inspection Technology

When it comes to building and pest inspection, you will want to hire a team that makes use of state of the art technology. With the new detection technology available today, inspectors can be more thorough, they can detect potential problems at earlier stages and they are quicker to conduct inspections, whilst being less invasive.

The end result for you is a lot of money saved; the earlier problems are detected, the less expensive they are to fix and the inspection itself is more cost effective because it is quicker.

Here are some of the new technologies that may be employed:

Thermal Imaging Cameras

These work by detecting fluctuations in the temperature of walls. This helps to pinpoint leaks and water damage and also termites that are living inside the walls or structure of the house.

Remember those old Sci-Fi movies with the X-Ray glasses, the thermal imaging cameras are a much like X-Ray glasses, which allow the inspector to see if there is a problem within or behind walls without actually damaging them.


This is an Australian breakthrough and is very effective in detecting termites. It works on a principle similar to that of radar.

The benefit of Termatrac is that it is non-invasive and it will not disturb any termites nesting in the building – the last thing you want is to find out where the termites are, only to have them quickly leave because they are disturbed by the noise.

Moisture Encounter

This is a tool that is suitable for use over the entire building. It can be adjusted according to the building material used and works by sending through low-frequency electronic signals.

It is used to detect moisture through various finishes and is non-invasive. It causes no surface damage at all.


Thermal Imaging – How it Works to Detect Pests

To protect your home from pests, particularly the extremely damaging termites, helpful building and pest inspections and monitoring are needed. Effective removal of termites means pinpointing the source of the infestation, finding the nest and exterminating the queen responsible for the proliferation of the termites.

There are now technological advances that can be adopted to improve the methods in detecting the presence of termites and to identify the cause of the infestation. One effective method is thermal imaging. Brisbane Building and Pest Inspections makes use of this technology as part of our methodologies in detecting termite infestation.

Non-Invasive Detection

Thermal imaging involves the use of infrared cameras to spot distinctive thermal changes in the property. Infrared imaging does not rely on visible light. Its main function is to visualise the rise and fall of temperature in different areas in the property.

Thermal imaging is favoured because it is non-invasive and non-destructive. This method can map thermal changes within hidden areas, such as within walls and below the soil. This is very important as these areas are the usual hiding places of termites. Being able to see where the termites are without damaging structures is advantageous to the property owner. If there is termite infestation going on within the hidden areas of property, the imaging device will see a distinct change in the thermal image. If the image covers walls, termite infestation appears as dark patches on the infrared image.

Proper Usage

Thermal imaging is very innovative and highly effective, but it must be used correctly. There could be sources of heat that can disrupt the detection process. It is best to remove other possible sources of heat so as to isolate the termite heat signals. For the purpose of the inspection, it is best to turn off machines such as air conditioners, refrigerators and computers, which will register heat changes in the area.

Thermal imaging will also be effective if used in areas with stable ambient temperatures that do not exceed 23 degrees Celsius. During summer, the device should be used during mornings. Other times, it is recommended that the imaging is done during the afternoons when the termites are more active.

At Brisbane Building and Pest Inspections we use thermal imaging as part of our pest detection methods. It is best to use this technology in tandem with other detection methods such as Termatrac, which uses radar technology. When used in tandem, the detection process becomes more accurate.